Skip to content

Heating Repair in Cupertino, CA

Serving Cupertino and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (669) 267-6986

The short answer

FrostPeak AC Repair diagnoses and fixes gas furnaces and heat pumps in Cupertino homes, with technicians coming from our San Jose base about 10 miles away. You don't have to replace a working furnace under Bay Area Air District rules. Gas furnaces manufactured from 2029 must meet a zero-NOx standard, so we help you weigh a repair against a future heat pump.

Cupertino winters are mild, but the damp, chilly nights from late fall through early spring still put your furnace or heat pump to work. When the heat stops coming on, blows cool air, or starts making a new noise, FrostPeak AC Repair sends a technician from our San Jose base, about 10 miles east, to find the cause and fix it. We repair gas furnaces, heat pumps, thermostats, and the ductwork that connects them in homes throughout the 95014 ZIP code and the rest of Santa Clara County. Below is what typically goes wrong, what a repair visit covers, and how current Bay Area rules affect your choice between repairing and replacing.

Why Cupertino Heating Systems Act Up

The Santa Clara Valley has a Mediterranean climate, with dry summers and mild, damp winters. Many Cupertino furnaces sit unused for months and then get switched on during the first cold snap. Over the summer, dust settles on the burners, flame sensor, and blower. When the furnace starts again, that dust can cause a burning smell, short run cycles, or no heat at all. Heat pumps wear differently. The same unit cools in summer and heats in winter, so wear builds up year-round.

  • The furnace lights briefly, then shuts off. A dirty flame sensor is a common cause.
  • The blower runs, but the air from the vents is cool.
  • The heat pump runs constantly or frosts over on damp mornings.
  • You hear clicking, banging, squealing, or rattling at startup.
  • Some rooms or floors stay noticeably colder than others.
  • The thermostat doesn't respond or keeps losing its settings.

What a Heating Repair Visit Covers

Your technician starts by asking what you've noticed and when it began. Then they check the system from the thermostat to the vents. On a gas furnace, that means the igniter, flame sensor, gas valve, pressure switch, inducer motor, blower, and filter. On a heat pump, it means refrigerant pressures, the reversing valve, the defrost controls, and the outdoor coil. We also check for safety problems such as a cracked heat exchanger or a blocked flue. Before any work begins, we explain what we found.

If a part has to be ordered, we tell you what it is and whether the system can safely run in the meantime.

Repair or Replace? What the Air District Rules Mean for You

Most heating problems can be repaired. New regulations don't force you to replace a furnace that still works. The Bay Area Air District appliance rules apply only when an existing furnace or water heater fails or is replaced.

Planning ahead still makes sense. Under Air District Rule 9-4, natural gas furnaces manufactured from 2029 must meet a zero-NOx emission standard. In practice, that points homeowners toward heat pumps when they replace a furnace after that date. If an older furnace needs a major repair, such as a new heat exchanger or control board, compare that cost with where your system is likely headed in the next few years.

The federal Energy Efficient Home Improvement Credit covered qualifying heat pumps placed in service before December 31, 2025. It isn't available for new installations now. Cupertino homeowners can check BayREN and their local clean energy provider for current heat pump and electrification incentives. Amounts and availability change with each funding cycle, so we confirm the current offer before we quote it.

Quick Checks Before You Call

A few simple checks can sometimes get the heat back on, or at least narrow down the problem. If you smell gas, skip these steps. Leave the house and call your gas utility from outside, then call us.

  • Make sure the thermostat is set to Heat and the setpoint is above room temperature. Replace its batteries if it uses them.
  • Check the circuit breaker and the furnace power switch, which often looks like a light switch near the unit.
  • Replace a dirty filter. A clogged filter can make a furnace overheat and shut itself off.
  • Make sure the furnace door panel is fully closed. Many units won't run if it's loose.
  • If you have a heat pump, clear leaves and debris from around the outdoor unit.

Heating Repair in Cupertino and Nearby Cities

Cupertino is about 10 miles west of our base in San Jose. We also handle heating repair in nearby Saratoga, Los Altos, Sunnyvale, Santa Clara, and Campbell. If you own a second home or rental property in the area, the same team can help with that system too.

More services in Cupertino

Related

What to expect

How a visit goes

  1. Find the cause first

    We test the system and pinpoint what's wrong before suggesting parts or replacement, so you aren't paying to guess.

  2. Explain it in plain language

    You'll hear what failed, why it likely happened, and what each option involves, without jargon or pressure.

  3. Give you real choices

    When repair and replacement are both reasonable, we lay out the tradeoffs and let you choose what fits your home and plans.

FAQ

Common questions

Do I have to replace my gas furnace because of the Bay Area Air District rules?

No. The Air District appliance rules don't require you to replace working equipment. They apply only when an existing furnace fails or is replaced. You can keep repairing your current furnace as long as repairs make sense.

What changes in 2029 for furnaces?

Under Rule 9-4, natural gas furnaces manufactured from 2029 must meet a zero-NOx emission standard. In practice, that points homeowners toward heat pumps when they replace a furnace after that date.

Can a heat pump keep a Cupertino home warm in winter?

Yes. The Santa Clara Valley's winters are mild and damp, which suits heat pumps well when the system is sized and set up correctly. On damp mornings, a heat pump may briefly run a defrost cycle. That's normal.

Is the federal tax credit for heat pumps still available?

No. The federal Energy Efficient Home Improvement Credit covered qualifying heat pumps placed in service before December 31, 2025. It doesn't apply to new installations now.

Are there local incentives for switching to a heat pump?

There may be. Check BayREN and your local clean energy provider for current heat pump and electrification incentives. Amounts and availability change with each funding cycle, so we confirm the current offer before quoting it.

Why does my furnace start and then shut off after a few seconds?

A dirty flame sensor is a common cause, especially after the furnace has sat unused all summer. A clogged filter, a pressure switch problem, or a blocked flue can cause the same symptom. A technician can pinpoint which one it is.

Tell us what your system is doing

Whether your AC is blowing warm air, your furnace won't start, or you're weighing a heat pump, contact FrostPeak AC Repair. We'll start with a diagnosis and walk you through your options.

Call (669) 267-6986 Request Service