Skip to content

Furnace Repair in San Jose and Nearby Cities

Serving San Jose and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (669) 267-6986

The short answer

If your furnace blows cold air, shuts off too soon, won't ignite, or starts making new noises, a technician should find the cause before it gets worse. Most furnace problems can be repaired, and Bay Area rules don't require you to replace a working furnace. Replacement is worth considering mainly when the heat exchanger is cracked or large repairs keep coming back.

Winters in the Santa Clara Valley are mild but damp. Most of the year your furnace sits unused, and when the first cold nights arrive, problems that built up quietly over the summer tend to show. FrostPeak AC Repair repairs gas furnaces and the blowers, controls, and thermostats connected to them for homeowners in San Jose and nearby cities. This page covers the warning signs worth acting on, what our technicians check, how to think about repairing versus replacing under current Bay Area rules, what affects the cost, and what happens during a visit.

Signs Your Furnace Needs Repair

Most furnaces give some warning before they stop working completely. Because South Bay homes need heat for only part of the year, small issues often go unnoticed until the system is needed. Call for service if you notice any of these:

If you smell gas or a carbon monoxide alarm goes off, don't wait for a repair visit. Leave the house without flipping switches or starting appliances, and call your gas utility or 911 from outside. Once the immediate danger is handled, we can find and fix the cause.

  • Cool or lukewarm air coming from the vents when the thermostat is calling for heat
  • The furnace starts, runs for a short time, then shuts off and repeats (short cycling)
  • Burners that won't light, or an ignitor that clicks over and over
  • Weak airflow from the registers, or some rooms much colder than others
  • New noises such as banging at startup, squealing, rattling, or a loud hum
  • A burning smell that lasts beyond the first few minutes of the season
  • A carbon monoxide alarm sounding, or the smell of gas
  • Heating bills going up even though you haven't changed how you use the system

What We Check During a Furnace Repair Visit

We start with what you've noticed, then go through the system in a set order. That way we find the actual cause, not just the part that failed last. A failed ignitor, for example, can sometimes trace back to an airflow or venting problem that will ruin the next one too.

After diagnosis, we explain what we found in plain terms, show you the worn or failed part when we can, and go over your options before any work starts.

  • Thermostat settings, wiring, and batteries
  • Air filter condition and return airflow
  • Ignitor or pilot assembly and flame sensor
  • Gas valve operation and burner flame
  • Inducer motor, pressure switch, and venting for blockages or disconnected pipes
  • High-limit and flame rollout safety switches
  • Blower motor, capacitor, and wheel
  • Control board and any stored error codes
  • Visual inspection of the heat exchanger for cracks, rust, or heat damage
  • Carbon monoxide readings at the appliance and in the surrounding area

Repair or Replace: Your Options

Many furnace problems are routine repairs: a dirty flame sensor, a failed ignitor, a weak blower capacitor, a stuck pressure switch. If the rest of the furnace is in good condition, repairing it is usually the sensible choice. Replacement is worth discussing when the heat exchanger is cracked, when major components keep failing, or when an older furnace needs an expensive repair and is likely to need more soon.

Local rules are worth understanding before you decide. Under Bay Area Air District Rule 9-4, natural gas furnaces manufactured from 2029 on must meet a zero-NOx emission standard. In practice, that points homeowners toward heat pumps when they replace a furnace after that date. These rules don't require you to replace equipment that still works. They apply only when an existing furnace fails or is replaced. Repairing your current furnace is still a valid option.

If you're thinking about replacement, a heat pump is worth considering here. The valley's mild winters suit heat pump heating, and the same system provides cooling for summers that run noticeably hot in inland and southern parts of the valley. Keep in mind that the federal Energy Efficient Home Improvement Credit only covered qualifying heat pumps placed in service before December 31, 2025, so it isn't available for new installations. BayREN and your local clean energy provider may offer heat pump and electrification incentives. Amounts and availability change with each funding cycle, so we confirm the current offer before including it in a quote.

What Affects the Cost of Furnace Repair

We don't quote a price until we've diagnosed the problem, because the same symptom can have very different causes. A furnace that won't heat might need a quick sensor cleaning or a new control board. These are the main factors that shape the cost:

Before we start any work, you'll get the price for the recommended repair. You decide whether to go ahead.

  • Which part failed, and whether it's a universal part or specific to your furnace's manufacturer
  • How easy parts are to get for older or less common models
  • Where the furnace is installed, such as an attic, crawlspace, closet, or garage
  • How long it takes to track down an intermittent problem that doesn't show up on demand
  • Whether related parts are worn enough that replacing them together makes sense
  • Any venting or gas connection corrections needed for the furnace to run safely

How a Furnace Repair Visit Works

When you contact us, tell us what the furnace is doing, when it started, and whether you've noticed any smells, noises, or alarms. That helps the technician come prepared.

On arrival, the technician asks a few questions, checks the thermostat, and runs the furnace to see the problem firsthand when possible. Diagnosis follows the checklist above. Then we explain what's wrong, lay out your options, and give you the price before starting. If the part is on the truck, many repairs can be finished the same visit. If it has to be ordered, we tell you so and explain whether it's safe to run the furnace in the meantime.

After the repair, we run the furnace through full heating cycles, confirm the safety controls work, check burner operation and carbon monoxide levels, and make sure warm air is reaching the house. We'll also let you know about anything else we noticed, such as a filter that needs changing more often or wear that's worth watching.

Before calling, a few quick checks can save time: make sure the thermostat is set to heat and set above room temperature, replace a clogged filter, confirm the furnace's power switch and breaker are on, and check that the furnace door panel is fully closed, since many furnaces won't run with it loose.

Furnace Repair by city

What to expect

How a visit goes

  1. Find the cause first

    We test the system and pinpoint what's wrong before suggesting parts or replacement, so you aren't paying to guess.

  2. Explain it in plain language

    You'll hear what failed, why it likely happened, and what each option involves, without jargon or pressure.

  3. Give you real choices

    When repair and replacement are both reasonable, we lay out the tradeoffs and let you choose what fits your home and plans.

FAQ

Common questions

Is it safe to keep using a furnace that's short cycling or making new noises?

Often it's not an emergency, but it shouldn't be ignored. Short cycling can mean a safety switch is shutting the furnace down for a reason, such as overheating or a venting problem. If you smell gas or a carbon monoxide alarm sounds, shut the system off, leave the house, and call your gas utility or 911 from outside.

Do I have to replace my gas furnace with a heat pump?

No. Bay Area Air District rules don't require replacing working equipment. The zero-NOx standard applies to gas furnaces manufactured from 2029 on, and it comes into play only when an existing furnace fails or is replaced. You can keep repairing a furnace that's in good condition.

Can I still get the federal tax credit for a heat pump?

No. The federal Energy Efficient Home Improvement Credit covered qualifying heat pumps placed in service before December 31, 2025, and it isn't available for new installations. Check BayREN and your local clean energy provider for current incentives. We confirm the current offer before including it in a quote.

Why does my furnace smell like burning when I turn it on?

At the start of the heating season, dust that settled on the burners and heat exchanger burns off, and that smell usually fades within minutes. If it lasts, smells electrical, or smells like gas, turn the furnace off and have it checked.

Can most furnace repairs be done in one visit?

Many can, especially common repairs like ignitors, flame sensors, and capacitors. Some parts, especially for older or less common models, have to be ordered. If that happens, we'll tell you and explain whether it's safe to run the furnace until the part arrives.

What should I check before scheduling a repair?

Make sure the thermostat is set to heat and above room temperature, replace the filter if it's dirty, confirm the furnace power switch and breaker are on, and check that the furnace door panel is fully closed. If none of that helps, it's time for a technician.

Tell us what your system is doing

Whether your AC is blowing warm air, your furnace won't start, or you're weighing a heat pump, contact FrostPeak AC Repair. We'll start with a diagnosis and walk you through your options.

Call (669) 267-6986 Request Service